Pu-4c442 Convection Blower Fan For Englander 25-pdvc, 55-shp10 Pellet Stoves

• 【The PU-4C442 Convection Blower Technical Specifications】★ RPM: 3000, ★ CFM: 140, ★ Volts: 115, ★ Cycles: 60Hz, ★ Amps: 0.94, ★ Wiring Connectors: 5" with with ¼" Male Terminal, and 2 pcs 24" with ¼" Female Terminal.
• 【Compatibility】➤ PU-4C442 Convection Blower Motor Replacement Parts for Englander 25-PDVC, 55-SHP10, 55-SHP10L, 55-TRP10; 25-CBEP, 55-SHPCBEP, 55-TRPCBEP; 25-EP, 55-SHPEP, 55-TRPEP; 25-EPI, 55-SHPEPI, 55-TRPEPI; 25-PFS, 25-PFSP Pellet Stoves.
• 【Compatibility】➤ PU-4C442 Convection Blower Motor Replacement Parts for Englander 25-PDV, 55-SHP22, 55-TRP22 (Pre: 2002); 25-PDVE, 55-SHP22E (Pre: 2002); 25-PDVP, 55-SHP15, 55-TRP15 (Pre: 2002); 25-PI, 55-SHP20, 55-TRP20 (Pre: 2001) Pellet Stoves. 【Please Note the Year of Production】
• 【High-Quality】The PU-4C442 Convection Blower is manufactured by FASCO factory. UL Certified, Powerful, Quiet, Energy Efficient and Long Lasting, 1 year warranty.
• 【Better Quality Shaded Pole Motor】The Englander PU-4C442 Convection Blower use a 3.3-inch frame shaded pole motor, large torque, high efficiency and large air volume.

Specifications:

Volts: 115

Cycles: 60Hz

Amps: 0.94

RPM: 3000

CFM: 140

Replacement for Part Number: PU-4C442

Compatible Englander Pellet Stove Models:

25-CBEP, 55-SHPCBEP, 55-TRPCBEP

25-EP, 55-SHPEP, 55-TRPEP

25-EPI, 55-SHPEPI, 55-TRPEPI

25-PDV, 55-SHP22, 55-TRP22 (Pre: 2002)

25-PDVC, 55-SHP10, 55-SHP10L, 55-TRP10

25-PDVE, 55-SHP22E (Pre: 2002)

25-PDVP, 55-SHP15, 55-TRP15 (Pre: 2002)

25-PFS, 25-PFSP

25-PI, 55-SHP20, 55-TRP20 (Pre: 2001)

Advantage & Benefit:

High Quality Bearing Motor

UL Certified

Powerful, Quiet, Energy Efficient and Long Lasting.

Please note:

Models manufactured in 1989-1990, use one blower. Models manufactured in 1991-1995, use two blowers. 1996 and later use one room air blower.

If your stove uses two blowers you will have to bend the mounting flange on the blower. If the blower is mounted on the left side, it must have the bend in the flange on the intake side of the blower. If the blower is to be mounted on the right side of the stove, the bend in the flange will be on the motor side of the blower.